next up previous contents
Next: pisco Up: Standard Reduction Commands Previous: long

   
optopus

CREATE/OPTOPUS inp_file [out_tab] [fmt_file] [old_equinox]
create input table for HOLES/OPTOPUS command
DRILL/OPTOPUS in_table [name]
write OPTOPUS drill command file
HOLES/OPTOPUS [inp_tab] [out_tab] [HH,MM,SS.sss] [+/-DD,AM,AS.ss]
[ac_flag] [p_flag] [old_eq,new_eq]
detetermine holes positions on Optopus plate.
MODIFY/OPTOPUS [table]
plot positions of holes on plate and enable rejection of objects.
PLOT/OPTOPUS [table] [label] [EW_flip_flag]
plot positions of holes on Optopus plate.
PRECESS/OPTOPUS [inp_tab] [new_equinox]
p recess RA and DEC coordinates in table created by CREATE/OPTO.
REFRACTION/OPTOPUS [inp_tab] [out_tab] [year,month,day] [exp] [lambda1,lambda2]
[start_st_slot,end_st_slot] [opt_st] [ast_flag]
correct for atmospheric refraction X and Y coord. on Optopus plate.
RESTORE/OPTOPUS table
restore previously saved session parameters.
SAVE/OPTOPUS table
save session parameters in descriptors
SET/OPTOPUS option1[=value1] option2[=value2] ...
set Optopus context parameters
SHOW/OPTOPUS
show session parameters.
ZOOM/OPTOPUS [table] [zooming_factor]
blow up section of Optopus plate and enable rejection of objects.


Petra Nass
1999-06-15