Descriptors have been derived from the concepts used in a FITS file
header and have many similarities with the FITS keywords.
In particular the names of
the MIDAS standard descriptors, e.g. NAXIS, NPIX, etc.,
(for details see Appendix ``Standard Descriptors'' of
the MIDAS Environment doc.) correspond to those in the FITS header.
Descriptors come in four flavours: integer, real, double precision and
character. Mixed types are not possible, i.e. you cannot have a real
descriptor TEST and an integer descriptor TEST at the same time.
Each descriptor also has a name (max. 15 chars.) and a length (no. of elements).
Writing values into
positions beyond the current length leads to an automatic extension
of the descriptor (and update of its length) just as
a text file is extended by the ``editor'' when you are editing it.
Beware, that you do not create `holes' by writing to
descriptor elements which are not immediately following the current last
element! MIDAS will not initialize the descriptor elements in between, so their
values are unpredictable.
The command to write values into a descriptor requires the name
of the data file (which could be an image, table or fit file),
the descriptor name, the descriptor type, the first element to be
accessed, and the total number of elements to be transferred (all separated
by a `/' (slash)). Finally, the data values are given (separated by commas
for numeric data, but no spaces). For example,
WRITE/DESCR imgfile Descname/C/1/7 Anyname
would write the ASCII string Anyname into the character descriptor Descname associated with the data file imgfile.bdf. Since spaces serve as parameter delimiters in MIDAS they have to be enclosed by double quotes ( ") if used as data. So
WRITE/DESCR imgfile Descname/C/1/7 " "
would fill Descname with 7 blanks.
WRITE/DESCR imgfile Descname/R/4/3 17.3,8.8E2,-.3
would write the numbers 17.3, 880.0, -0.3 into elements 4,5 and 6 of real descriptor Descname. If the descriptor were created with fewer than 6 elements it would be expanded automatically.
WRITE/DESCR tblname.tbl Descname/R/4/3 17.3,8.8E2,-.3
would write the numbers 17.3, 880.0, -0.3 into elements 4,5 and 6 of
real descriptor Descname of the table file tblname.tbl.
Note, that we had to add the file extension .tbl
to the name tblname, since
the command WRITE/DESCR defaults the first parameter to an image
and appends the file type .bdf if none is given by the user.
Single descriptor elements can also be written in a more direct way, via
frame,descr = value, e.g. to set STEP(2) of
image lola.bdf to 1.234, use
lola,step(2) = 1.234
The value can also be an expression made up of constants and elements
of any MIDAS data structure, see the subsection 
.
This is how descriptors work at the most basic level. However, in many
cases, higher level commands have been implemented to update
specific descriptors. The MIDAS command CUTS, which sets the
high and low cuts of an image (in descriptor LHCUTS)
for displaying or plotting it, is an example of this.
Some of the commands dealing with descriptors are:
READ/DESCR, WRITE/DESCR, SHOW/DESCR, DELETE/DESCR, INFO/DESCR, COPY/DD.
An optional help text can be attached to each descriptor and is then displayed via the READ/DESCR and SHOW/DESCR commands. This text is copied from the original FITS file (if existing) when reading in the data file or can be explicitly set via WRITE/DHELP.